Updating Firmware on Sony DW-U10A

SteveC

0
Joined
Jul 5, 2002
Messages
789
Location
NJ, USA
Does anyone know if it's possible to update the firmware on the DW-U10A (the OEM version of the DRU-500A)? There's nothing listed for it under the Sony site, and the updater for the DRU-500A doesn't detect the drive.
 
After a little searching, I came up with this thread, which has a link which lets you change the firmware to the DRU-500A. It works, and now the Ritek G03 are properly identified as 2x, instead of 1x as they were previously.
 
Good going, Steve.

I also found that when I did a search for DW-U10A firmware but didn't mention it since I didn't think it was what you were after.

-sk
 
Back
Top