Search results

It was a privilege to be able to give thanks to you for all the effort you put into SF. Three cheers for Doug! :thumbleft: :beer: :jumpin: :beer: :thumbright:

I've noticed all of CompUSA's specials lately are 7200 RPM. I'm sure they still have 5400 RPM in stock, but at this point I don't see them advertised. I'm hoping they have a nice clearance sale soon on 5400 RPM. I'll stock up on some bulk storage. :)

Interesting. Don't forgot, though, that this is on a road classified as "steep", which is even worse than "mountain". The places where such steep gradients exist are likely curvy mountain roads where speeds of more than 30 or 40 mph would be unsafe anyway(since you could drive off a cliff on a...

To put things in perspective, the access times are less than a factor of two improvement over even run-of-the-mill 5400 RPM drives. Even an X15 is only about 3 times faster than 5400 RPM. Unless it's about the same price per GB, just as cool, and just as quiet, I simply couldn't justify it...

It doesn't need to. A 35HP engine has enough reserve power to do that on it's own provided the car is designed with a low drag coefficient(~0.2) and fairly low rolling resistance tires. I'm doing the example with a 4% gradient as 6% gradients simply don't exist on any Interstate highways...

If you think what I wrote is scary then it's a good thing one of my cousins doesn't post on this board. This is a person who considers Hitler one of his personal heroes, and he's far from the only one. A person my brother works with has feelings to the same effect. The point here is that if...

Tannin, you probably would have come to that realization by the time you were about six if you lived in New York. For many reasons, the Jews have been a thorn in my side ever since I could remember, and current events have only increased my feelings in this matter. Yes, Israel is unreasonable...

I remember reading about this in Popular Science in the 1980s. Ultimately, I think what killed the idea was a combination of cheap gas prices coupled with advances in electronic components like GTOs and capacitors. It was possible to contain the flywheel if it failed(they even showed some...

While we're on the subject, does anybody know if it is possible to unlock the multipliers on either the Pentium II or the Tualatin Celeron? I've never seen any references to this, although there are plenty of sites showing how to unlock AMD processors. My M/B has 112 MHz and 133 MHz FSB...

It may not answer your question, but I suggested another, in my opinion more feasible, approach to accomplish essentially the same thing:

Once it's general knowledge that the cancer caused by pollution kills millions each year I think you might very well generate a war with environmental causes. I can just imagine oil company executives swinging from lamp posts. :lol: Coug, feel like blowing up a couple of pipelines and...

You can't, but you can create a world where it is impossible to create widespread death and destruction because of those differences. One problem is that many countries, especially younger Western ones, feel that their way is the only way, and that they need to impose this way on the indigenous...

To elaborate: 1)Nationality: the only reason large nation-states exist is to protect their populations from.....other large nation-states. Some nations will attack their neighbors for various reasons-territory, resources, religious differences, etc. Get rid of the nation states everywhere and...

Maybe one day we'll have a world without borders. It's always been a hope of mine. Race, religion, and nationality are all things that have been used to divide people, create an us versus them mentality. I doubt it'll change in my lifetime, but someday. Yes, someday.

Of course I'm proud to be an American. Proud to be from the same country as Britney Spears and Michael Jackson Proud to be a citizen of the world's greatest polluter Proud to be an elite member of the world's most hated country Proud to be part of a country whose educational system is...

Cold fusion was initially ridiculed by the scientific community when it was first discovered. During the last few years it has seen increasing acceptance as more of the experiments have been duplicated. We still have a while to go before it becomes a practical energy source but once it does...

It's obviously been a while since this idea was first proposed. Just look at one of the comparisons: I seem to remember 1 GB hard drives were the norm around 1995 or 1996. Evidently, there's still R&D to be done before we have a manufacturable product. Still, should the idea be developed...

Thanks for the tip. I managed to find the SHSMOD utility. I had done the registry tweak a while ago to get my modem to connect at higher than 115,200 bps but my ports seemed to bottleneck it. Anyway, the utility works and I'm connected at 230,400 bps. Text page loads do indeed seem much...

I've heard good things about Road Runner myself. The main thing stopping me is the cost-$50/month vs $9.99/month. The phone plan we're on allows unlimited local calling so phone costs for dialup are a non-issue. Given that I only average about 30 MB/day downloading(about 90 minutes worth)...

You're not the only one. My sister had her house built new on Long Island about 7 years ago, and the electrical wiring left quite a bit to be desired. I think the phone line was OK though. It's getting increasing hard to find people who want to do that type of work, so it's a crapshoot as to...

I'll try a few of the suggestions here and see what happens. So far my lines look to be in good shape. I checked the lines coming off the pole to my house yesterday(I shimmied up the telephone pole). They seem to be in good shape as best I can tell(no corrosion, water damage). Of course...

I sent it to you in a PM.

I use Opera exclusively for downloads. I can pick up where I left off usually, even after a reboot. Occasionally, however, an error occurs and Opera just loses track of what it already has, and then I need to start over again. This is maybe one out of 50 downloads. Since most of my downloads...

It can't hurt to send me the docs. Usually my download speed runs from about 5.5 KB/sec to 5.9 KB/sec, so I don't think I'll be able to do much better, but it can't hurt to try. Thanks for the offer with Opera :), but I already have it installed

I'm using a Motorola ModemSURFR 56K External PnP. Since it connects through my serial port, the connection speed always appears as 115200 bps regardless of the speed the modem is actually connected it. Part of the problem with dropping down in speed here are the cordless phones in my house...

The reason I'm asking this is because I'm at the end of my rope right now. I was doing a 50MB download with Opera, which lets me stop and resume downloads. However, even with this feature sometimes errors occur and the entire download starts over again. This happpened twice already with the...

I'll echo the sentiments about putting fans on the Northbridge or video cards. A large passive heat sink will do just fine in either case, or if you really must have a fan, don't have one of those miserable 25mm jobs that move less air than a moth and sound like mosquitoes on steriods. When my...

If I had to suggest something, it would be a ride on the TGV, but since that's not local to you maybe Amtrak will be an OK if somewhat half-assed substitute. Mercutio also offered a few interesting if unconventional suggestions. Autos, whether limos, rent-a-cars, whatever, are just too mundane...

Since it looks like war is inevitable at this time, I suggest everybody, especially Americans against the war, put aside their personal feelings and unite to make sure the troops over there get all the support necessary to get the job done as quickly as possible. We don't need this to turn into...

I found I very long list of hits when I searched for "Israel" and "war crimes", so rather than bore everyone with hundreds of links I just picked two more or less at random. http://www.sis.gov.eg/online/deno/html/deno2.htm Nice list, isn't it...

Although I fully supported the attacks on Afghanistan following 9/11 because we were going after those directly responsible I really can't make up my mind one way or another about Iraq. To be sure, Iraq sponsors terrorism and Iraq may acquire WMD in the future if nothing is done. Saddam will...

The limit for the Joliet file system is a 64-character filename. The ISO standard allows up to 255 characters in a path(31 characters for MS-DOS 8.3 compatible level 1 ISO). Nero has an option to allow more 255, but I'm not sure if any other burning software does. As some here mentioned, the...

1 silent hard drive: priceless The best things in life are free. For everything else there's MasterCard­®

I've always been a bit puzzled as to what those rolling blackouts actually accomplish as far as saving energy. Shutting everything down in only one small area every few weeks seems to me like it would save at most a fraction of a percent, and cause great inconvenience as well. Wouldn't simple...

I think everyone here knows I'm still running Win98SE. That usually means daily reboots, sometimes precautionary, sometimes involutary. My Linux box was actually up a full week before I had to reboot into Win98 to run some taxicam repair software. I've also had Win98SE running on that machine...

Sounds good to me. I've had similar issues with lead where it doesn't take all the details of the mold. I think it's because the mold cools the lead very fast before it has a chance to flow everywhere. No matter, it should fit good enough to take the heat away from the drive. We're not...

Thanks. Sounds good to me. :) I'll be happy to take it for that price if nobody buys it. BTW, I checked eBay yesterday and I saw drives smaller than that going for $30+. I even saw someone who had a 540 MB drive for a $15 BIN price, although he had no takers so far. I wouldn't be surprised...

How much? Honestly, I'm willing to pay around $1 per GB plus shipping(no hurry-UPS or USPS ground is fine). Less is the drive flaky, more if it's brand new, never used. I'm looking to pick up a few used IDE drives in the over 2GB class, but they're currently going for ridiculous prices on...

Interesting thought. I'm thinking with the proper tools you could machine something to more or less fit the top of the drive instead of using lead. Also, someone pointed out above that the sides of the drive get hottest, meaning this is the best place to attach a heat sink. Since I want to...

Yes, exactly what I had in mind. :D

You know this is about oil, I know it's about oil, but sadly the average American couldn't care less. In fact, the average SUV-driving moron probably supports anything that keeps the price of gas low. All I hear now from people are complaints that the price of gas is going up. The minute I...

The play dough was a nice idea. :) It seems to have worked well. Steel should work just fine for melting lead. I think most steels melt at well over 2000°F, so you should have nothing to worry about as long as there are no plastic handles. I don't think duct tape and tin foil would work...

Did you make sure that it is 100% silicon caulk(generally used in kitchens and bathrooms) and not acrylic or siliconized acrylic? Did it smell like vinegar or more like petroleum distillates? The acrylic caulk or siliconized acrylic caulk will take days to get completely hard, and will not be...

The heat's no big deal once it's cured(i.e. once all the water comes out). This takes about 24 to 48 hours. We're only talking ~600°F here. I've used plaster of paris molds multiple times for lead castings. I've even had luck with one-use cardboard molds, although these sometimes ignite if...

I think I would make the initial mold of the HDD top with silicon rubber. Home Depot has it in caulking gun sized tubes for about $3 to $4, and one tube should be plenty. Cover the top of the drive and go down along the sides about 1/2" or so(exact amount not critical). Put on about 1/4" at a...

Here's the alloy I was talking about: http://www.micromark.com/casting.html Go to the bottom of the page and look at type 160 and type 280. Also a lot of other goodies for making molds here. The two low-temp alloys run $14.95 for 11.4 oz. They also have something that's almost pure...

That should work, although you'll might need to get the steel plate fairly hot before hand so the lead has a chance to make good contact with the plate before it solidifies. Before you embark on this project though a couple of precautions: 1)Work in a well-ventilated area(lead fumes are not too...

You don't live anywhere close to a range, do you? :lol: I agree getting that much lead would be problematic and costly, but you could make an exact mold of the WD drive's top for a perfect fit. Not easily done with steel or even aluminum, whereas lead can be easily melted and cast on a stove...

Very intriguing. This is definitely something worth trying. If the sound is really damped because of the sheer mass of the plates, probably lead sheets would work best of all. Lead is also fairly soft, so it should be easier to work with than steel or aluminum. In fact, if you needed to make...

A couple of my own ideas: 1)Buy a few inexpensive removable hard drive racks(Cyberguys has one for only $7.99), put a rack in each of your machines, and use the drive for backup/ file transfer. 2)Use it to upgrade the drive in your Linux/other experimental box. 3)Sell it on eBay. I'm frankly...