Latest activity
-
Mercutio replied to the thread Laptop Boot Drive Swap Fails.Gen 4 and 5 m.2 drives probably do need at least some cooling but I don't know if it has to be a heat sink with pad. Most new... -
ddrueding replied to the thread Something Random.Under acceleration I can get it above 600kW, and it accelerates into the speed limiter quite hard. The cross sectional area is pretty... -
Jjtr1962 replied to the thread Something Random.I'm honestly surprised it's not more than that. 450Wh/km * 235km/h = 105.75kW = 142HP. That seems like a fairly low amount of power to...
-
ddrueding replied to the thread BIOS Updates.I update new motherboards immediately, then check every once in a while. I won't install one less than a month old; that is usually long...
-
ddrueding replied to the thread Something Random.Did Venice and then Riva del Garda, now on the way back north. Fun fact, at 235km/h (limited due to winter tires required in Germany...
-
Done. Tried AOMEI Partition Assistant again, with the Copy OS option. I rebooted and tried to boot from the external NVME enclosure... -
mubs replied to the thread Laptop Boot Drive Swap Fails.Is a thermal pad required between a heatsink and an M.2 NVME SSD? Doesn't make sense to me. 1. There is no flat, machined surface; only... -
mubs replied to the thread Laptop Boot Drive Swap Fails.Done. Tried AOMEI Partition Assistant again, with the Copy OS option. I rebooted and tried to boot from the external NVME enclosure...
-
mubs replied to the thread Laptop Boot Drive Swap Fails.Sorry was out all day yesterday. On the laptop I have a paid version of AOMEI Partition Assistant. This low cost version does not allow...
-
Mercutio replied to the thread Laptop Boot Drive Swap Fails.What tool(s) are you using to clone?
-
sedrosken replied to the thread Laptop Boot Drive Swap Fails.Maybe try setting up Windows on the new drive fresh, and then cloning the disk so that your firmware picks up that it's supposed to be... -
mubs replied to the thread Laptop Boot Drive Swap Fails.Cloned the entire drive. First time, I expanded the Windows partition on the destination drive during cloning. Didn't work. Second time...
-
sedrosken replied to the thread Laptop Boot Drive Swap Fails.Are you cloning the entire drive or just the main Windows partition? You need to see a few-hundred-meg FAT32 partition on your drive...
-
I bought a cheap laptop in 2021. It came with a 256 GB NVME SSD and W10. I decided to replace the NVME with a 1 TB. I did a disk clone a...
-
mubs replied to the thread Windows 11.:eek::unsure:
